Submersible pump manufacturers tell you the knowledge of submersible pumps

Common sense knowledge of submersible pump use

Submersible pump manufacturer: Submersible pumps are widely used in various industries, agriculture and domestic water transportation. Before using submersible pumps, we need to understand its common sense to avoid unnecessary losses: submersible pumps cannot run dehydration, in anhydrous conditions The test run should not exceed 5 minutes. During the pumping process, if the water level continues to drop, it should be noted that the pump body cannot work above the water surface.

2. It cannot be restarted immediately after shutdown. It is necessary to wait until the water in the pipeline has returned. If the water cannot be discharged after startup, it should be stopped immediately to find out the reason and eliminate it.

3. It should be used near the designated elevator; the inner diameter of the matching rubber tube, iron tube or canvas tube should meet the technical requirements.

4. When the submersible pump is put into the water or raised from the water surface, grab the sling and do not pull the cable. If you want to carry, disassemble or repair, you should cut off the power first.

5. When diving, lift it vertically, do not lie down or sink in the mud. Submersible Pump Manufacturer

6. The submersible pump should not be started frequently. When the pump is in use, bamboo mesh or barbed wire can be used outside to prevent weeds in the water from clogging the mesh of the submersible pump or blocking the impeller of the pump.

Submersible pump manufacturers' pumps have a variety of testing methods during the production process. The finished product will be tested in the actual operation of the product. Detect the relevant parameters of the actual operation of the pump: current, voltage, speed, flow, head, normally closed point current, normally open point current, etc., which can effectively ensure the quality of the pump. To ensure safe, stable and long-term operation of customers in the process of use. Uses and features: Stainless steel submersible pump (ZJQH) is a well submersible pump that is directly connected to the pump and directly submerged into the water. Slim structure. Single-stage or multi-stage upper pump type water-filled wet three-phase asynchronous motor submersible electric pump.

The pump products produced by submersible pump manufacturers are mainly developed for agricultural irrigation, sprinkler irrigation, industrial and civil building drainage systems, and are suitable for ponds, fish ponds, water towers, and high-rise water supply and fountains. Conditions of use: rated frequency 50HZ/60HZ, rated voltage 380V/660V1140V/3KV/6KV and other three-phase AC power supply. The electric pump should be immersed in water for operation, and the diving depth requires complete immersion in the liquid.